Showing posts with label wilson. Show all posts
Showing posts with label wilson. Show all posts

Sunday, October 9, 2011

46/52 - Smokin

A Smoking Tennis Ball
Smokin

Here's this weeks entry for the project. I know I have photographed a Tennis ball before but opted to use one again for this shot. I wanted to use smoke to give the shot a feel of speed and movement. I'm nto sure if I succeeded but here are the results anyway.

Lighting setup shots inside.


lighting setup for the photograph of the smoking tennis ball
Lighting Setup - Smokin

I used a two light setup for this one (I would have preferred to use three lights but I've got only two!).

A Canon 580 EX II was fired "on axis" at 1/128th and zoomed to 105mm to light the ball. The camera was set to a white balance of tungsten to give the smoke a blue colour. To correct this, I used CTO gels on the 580 EXII.

The second light was a Canon 430 EX II fired from camera right at 1/64th and zoomed to 105mm to light up the smoke. The light from this strobe was bounced back onto the ball with a white foam-core board form camera left.

A black foam-core board was used for the background.



Thursday, September 29, 2011

45/52 - Ace

A Photograph of a Tennis racquet with blue bokeh created on the strings.
Ace

I was quite sure that the strings on a Tennis racquet could be used to produce bokeh if lit from the correct angle. I decided to test this out yesterday and produced a couple of photographs which doubled up as this week's entry for my project. The main problem which I had to contend with was working out an angle which produced bokeh as well as a half decent composition for the photograph itself.

Lighting setup shots inside.

Lighting setup for the shot of a Tennis racquet above
Lighting Setup - Ace

This again was a two light setup.

The main light was a bare Canon 430 EX II fired at 1/64th from camera left. This light was used to light the closer edge of the racquet. I placed a white foam-core board at a slight angle under the racquet to bounce the light from the 430 EX II back onto the under side of the racquet and create some separation on the black bottom edge. The effect is subtle and can be seen on the bottom edge of the racquet on the right hand side of the "Wilson" sticker. If I hadn't placed the white foam-core board under the racquet, this section would have been black and would have merged into the background.

The bokeh was created by a Canon 580 EX II fired at 1/128th from in front of the camera and slightly to the left. This flash had a CTB gel on it. The light from this flash also created the highlights on the further edge of the racquet.

I used a black foam-core board as the background.